ac-dmis编程实例

问题描述

精选答案

以下是一个AC-Dmis编程实例。

程序目标：测量一个圆柱体的直径和高度。

程序步骤：

1. 定义并设置工件坐标系。

2. 设置测量点位置。

3. 创建一个圆柱体的测量特征。

4. 设置圆柱体的测量参数。

5. 创建一个圆柱体的构建特征。

6. 运行测量程序并生成报告。

具体示例代码如下：

```

PROGRAM = Diameter and Height Measurement

DIMENSION/CYLINDER,NAME = Cylinder1

ASSIGN/V1=Cylinder1.CENTER_1

ASSIGN/V2=Cylinder1.CENTER_2

ASSIGN/V3=Cylinder1.CENTER_3

ASSIGN/V4=Cylinder1.DIRECTION_1

ASSIGN/V5=Cylinder1.DIRECTION_2

ASSIGN/V6=Cylinder1.DIRECTION_3

ASSIGN/V7=Cylinder1.RADIUS

ASSIGN/V8=Cylinder1.HEIGHT

ASSIGN/V9=Cylinder1.TOLERANCE

ASSIGN/V10=Cylinder1.DIAMETER_1

ASSIGN/V11=Cylinder1.DIAMETER_2

ALIGNMENT/START,RECALL:STARTUP,LIST=YES,MODE=STD

ALIGNMENT/LEVEL,ZPLUS

ALIGNMENT/TRANS,XAXIS,Cylinder1.CENTER_1,Cylinder1.CENTER_2,Cylinder1.CENTER_3

ALIGNMENT/TRANS,YAXIS,Cylinder1.CENTER_1,Cylinder1.CENTER_2,Cylinder1.CENTER_3

ALIGNMENT/TRANS,ZAXIS,Cylinder1.CENTER_1,Cylinder1.CENTER_2,Cylinder1.CENTER_3

MEASURE/PLANE,Cylinder1.PLANE_1

MEASURE/CIRCLE,Cylinder1.CIRCLE_1

MEASURE/CIRCLE,Cylinder1.CIRCLE_2

MEASURE/CIRCLE,Cylinder1.CIRCLE_3

CONSTRUCT/ALIGN,Cylinder1.PLANE_1

CONSTRUCT/POINT,Cylinder1.CIRCLE_1

CONSTRUCT/CIRCLE,Cylinder1.CIRCLE_2

CONSTRUCT/CIRCLE,Cylinder1.CIRCLE_3

CONSTRUCT/CYLINDER,Cylinder1

REPORT/CYLINDER,Cylinder1

```

希望以上示例对你有所帮助！